Close Menu
Metric 43897 SAE Flat Washers - M16
CORROSION-RESISTANT FINISH: Zinc plating offers moderate protection against rust and corrosion
SAE ENGINEERED: Designed for use specifically with SAE threaded bolts
INCREASES FASTENER SECURITY: Flat washers are used to increase the pressure a bolt or screw provides in material
PART OF A COMPLETE FASTENING SOLUTION: Prevents a nut, bolt, or screw of the same finish and size from pulling through material
Parts are coated with zinc for a corrosion-resistant finish
These metric SAE flat washers measure 16mm in diameter
One (1) refill box per sellable unit
12 pieces per retail package
Stainless 44519 Metric Flat-Head Cap Screws M4-0.70 x 30mm
FOR INDUSTRIAL APPLICATIONS: Ideal for use in confined areas where the head needs to be flush or below the surface
HEX SOCKET DRIVE: Prevents slippage during installation
BEST-IN-CLASS CORROSION PROTECTION: Stainless steel finish combines a polished look with superior protection against rust and corrosion
PRE-DRILLING RECOMMENDED: For installation, drill a hole in the material that matches the diameter of the bolt
COARSE SCREW THREAD: Designed to prevent splitting or snapping in pre-drilled material
BUILT FOR METRIC SYSTEM: Ideal for applications involving metric measurements
These stainless steel metric flat-head socket cap screws feature coarse M4-0.70 thread, measure 30mm in length, and install with a 2.5mm Allen wrench
One (1) refill box per sellable unit
10 pieces per retail package
Full-Thread 44610 Metric Hex Cap Screws M16-2.00 x 100mm
MADE USING CLASS 8.8 STEEL: Appropriate for most general use (match with Class 8.8 washers and nuts)
FULLY THREADED SHANK: Offers added security and peace-of-mind
CORROSION-RESISTANT FINISH: Heat-treated zinc combines lasting durability with strong corrosion protection
HIGH-TORQUE DESIGN: Hex cap head and machine threads combine to offer higher torque capability
PRE-DRILLING RECOMMENDED: For installation, drill a hole in the material that matches the diameter of the bolt
These class 8.8 full thread hex cap screws feature coarse M16-2.00 thread and measure 100mm in length
One (1) refill box per sellable unit
3 pieces per retail package
Full-Thread 44616 Metric Hex Cap Screws (M20-2.50 x 80mm)
MADE USING CLASS 8.8 STEEL: Appropriate for most general use (match with Class 8.8 washers and nuts)
FULLY THREADED SHANK: Offers added security and peace-of-mind
CORROSION-RESISTANT FINISH: Heat-treated zinc combines lasting durability with strong corrosion protection
HIGH-TORQUE DESIGN: Hex cap head and machine threads combine to offer higher torque capability
PRE-DRILLING RECOMMENDED: For installation, drill a hole in the material that matches the diameter of the bolt
These class 8.8 full thread hex cap screws feature coarse M20-2.50 thread and measure 80mm in length
One (1) refill box per sellable unit
2 pieces per retail package
